Filter By:
- Parts & Accessories (41)
- Wheels (78)
- Hubs (6)
- Rims (5)
- Spokes (8)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$70.00
- Cold forged 304 stainless steel with rolled threads
- Lightweight 2.0mm/1.7mm/2.0mm double-butted form
- Nipples sold separately
- 172g (32 spokes @ 262mm)
- Bag of 50

$55.00
- Cold forged 304 stainless steel with rolled threads
- Lightweight 2.0mm/1.7mm/2.0mm double-butted form
- Nipples sold separately
- 172g (32 spokes @ 262mm)
- Bag of 50

$29.99
Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

$124.99 - $479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles.
With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use.
“The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.”
Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch.
All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost.
The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes.
Baron S1 Wheelset
- Use: Plus Tire Performance, Adventure, and Trail
- Internal Rim Width: 35mm
- Optimal Tire Size: 2.8 to 3.2-inch
- Hubs: Stan’s Neo 32-hole Front, 32-hole Rear
- Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples
- Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)

$5.00
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches
- Cold forging technology, CrNi stainless steel with rolled threads
- No hub slotting necessary
- 139g (32/265mm)
- Box of 20
- Nipples sold separately

$61.49
- Straight gauge 2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches
- 222g @ 32h/265mm
- Box of 72
- Nipples sold separately

$71.99 - $94.00
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels.
- Double Butted: 2.0/1.8/2.0
- One 264mm spoke = 6g
- Nipples sold separately

$85.99
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels.
- Double Butted: 2.0/1.8/2.0
- One 264mm spoke = 6g
- Nipples sold separately

$23.28
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels.
- Double Butted: 2.0/1.8/2.0
- Compatible with straight pull hubs only
- One 264mm spoke = 5.9g
- Nipples sold separately

$11.20
Tubeless valves for DT Swiss rims for repair or replacement.
- DT Swiss Narrow Base Tubeless Valve - 73mm

$0.69 - $45.99
The buyer's choice for wheel builders looking to save weight.
The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use.
- Weight: starting at 20g for 64 nipples

$12.99 - $17.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips
The valves you need to upgrade to Tubeless
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Use only with Bontrager TLR rim strip with rectangular base
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Sold as singles

$9.98
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention

$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum
- Similar to Fox Kabolt axle

$39.95
The Wolf Tooth axle uses a captive steel washer under the head to reduce friction on the fork leg. This protects your expensive fork, transfers more of the tightening torque to clamping load for a stiffer interface and prevents the axle from sticking or galling when you want to remove it. These are also a great replacement option for lost or damaged stock axles. Always apply a small amount of grease to the washer and threads when installing.
- Designed and manufactured in Minneapolis, MN USA
- 7075 T6 Aluminum
Not compatible with RS-1 fork

$1.95
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels.
- 14mm x 1mm (1411-AN) sold in pairs
- All others sold individually

$59.99
Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP.
It includes the following:
- Threaded axle spacer M12 x 1.75 Coarse
- M12 x 1.5 Medium
- M12 x 1.0 Fine
- End Cap

$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)
$49.99
Tannus Armour Tubeless inserts are the result of years of top level multi-cell foam manufacturing mixed with extensive professional riding experience. At the heart of Tannus is the patented Aither Technology; a multi-cell foam compound that forms the structure of the Armour. The inserts are designed to displace small impacts while offering a spring-like rebound for a smooth yet playful ride.
- 3% Faster than standard tubeless
- Flexible sidewall stabilizing "Wings" for smoother ride quality, with 50% more vibration damping
- 20mm of rim protection
- Not a sealant sponge – keeps sealant where it belongs
- Easy Installation (5 Minutes, No tools required)
- 150g - About as much as a standard tube (a little lighter)

$129.99
Product specs:
- Str tubeless ready
- Size: 27.5", 29"
- Outside width: 40mm
- Inner bead width: 36mm
- Weight: 27.5"-515g, 29"-550g
- Double wall welded rim (sleeved rims available oem only)
- Brake compatibility: disc only
- Hole count: 28/32

$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

$26.00
Stan's Threaded Valve Extenders let you convert deep-section rims to tubeless. They're precision-machined from aluminum and are designed to fit deep-dish carbon and aluminum rims. And, they're threaded on the outside so you can install the Presta lock-ring nut for a perfect seal.

$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.

$43.49
Sta Tru Front Wheel
- Single Wall rim
- Hub/Brake Compatibility: Rim Brake
- Wheel Size: 20-inch
- ISO Diameter: 406 / 20-inch BMX
- Front Axle: 3/8-inch x 100mm
- Valve: Schrader
- Tire Type: Clincher
Page 1 of 5
Next page