Brakes/Levers/Pads

$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.

$12.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

$19.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$49.00
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

$129.00
Avid's BB7 MTN S Mechanical Disc Brake delivers with power, control, and a sleek black anodized finish that makes this brake look as fast as you feel. You'll love the simple cable pull system that's optimized for linear-pull levers. Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds for powerful braking with positive modulation in any condition. This brake kit includes an HS1 rotor for solid stopping power.

$20.99
Keep your caliper road brakes in safe working order with these Bontrager replacement brake pads.
Genuine replacement parts
Reliable Bontrager stopping power for optimal operation and safety.
- Sleek brake pads and cartridges are Shimano compatible
- British Standard Compound (BS)—Long wearing pad compound
- Exceeds all US standards for brake pads—Sticky rubber for improved braking
- Sold in pairs

$8.00 - $29.99
- T100 Sintered Metallic: long-life, all-condition compound
- T106 Semi Metallic: no-bed, shorter-life, quieter compound
- Set includes one pair of pads with retention clip

$17.99 - $18.99
Jagwire's Mountain Sport Disc Brake Pads (Tektro) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

$17.99
Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.
$9.75 - $24.95
- Thinline: Thinner, longer molded pads for extra clearance and easy adjustment
- Red: semi-aggressive compound for good performance
- Salmon: aggressive compound for extreme weather conditions
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$6.95 - $11.99
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw.
Compounds:
- Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
- Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions.
- Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry.
- Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents.
- Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop!
Features:
- Patented Plow Tip
- Water Grooves
- Rim Friendly Compounds
- Fits 55mm length holders
$8.50
$16.99
50% Off
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel

$9.50
The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight.
- Water grooves
- 7.65 contact width
- Reduced weight
- Rim Friendly Compounds

$12.50
- Extra-long molded pads for MTB linear brakes
- Black: standard compound designed for dry condition riding
- Salmon: aggressive compound for extreme weather conditions
- Dual: combination of Salmon and Black compounds for more controlled, smoother stopping
$17.00
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel

$28.50
The Dura 2 Advanced Holder is a forged aluminum holder with dual pivot adjustment that houses Kool-Stop's Dual Compound Dura Type insert. These holders will fit most Shimano/SRAM type brake systems.
Features:
- Aluminum Holder
- Water Grooves
- Dual Pivot Adjustment
- Dual Compound

$10.00 - $54.00
- Reinforced hydraulic tubing designed for Magura mineral-oil fluid
- Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit
- Sold each: (1) kit per brake
- Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately
- Choose black or white options for MT Next and MT series

$39.99
Compatible with caliper and cantilever brakes
- Forged aluminum lever and body
- Ergonomic 2-finger lever design
- Return spring with reach and cable tension adjust
- Hinged clamp allows installation without removing grips/tape
- Fits 1.5-1.6mm brake cable type
- 90g pair

$19.00
SRAM's Pad Inserts are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

$24.99 - $31.99
SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD).
- For use with Level Ultimate & Level TLM Brakes
- Pad Material: Organic
- Type: Road/CX
- Includes guide pin, clip, & pad spreader

$27.00
Original equipment pads for no-compromise disc brake performance.
- Steel backed organic pad is quiet
- Each pad kit includes two pads, a pad spreader spring, guide pin and clip
- For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

$32.00
SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

$47.00 - $59.00
Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

$54.00
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance.
- Designed for road use
- Paceline brake track offers quiet brake operation

$58.00 - $69.00
- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation
- New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint
- HS2 is more powerful, and quieter rotor with best-in-class heat management

$77.00
SRAM's CenterLine rotors are light-weight, quiet, smooth and robust, featuring a two-piece design with an aluminum center and steel brake track.

$135.00
As SRAM’s first direct mount road brake, the S-900 does more than just complete SRAM’s road brake product line. It has a design that delivers great power and superior feel. The design reduces what engineers call “splay force,” sending energy into the brake instead of the frame and fork. This results in a more efficient transfer of energy from lever to rim, making for solid modulation and a snappy return. The brake provides clearance for up to 28c tires and is compatible with all non-hydraulic SRAM road levers, including SRAM RED eTap.
- Direct mount (Rear)
- Compatible with non-HRD SRAM road shift-brake and brake levers
- Sold individually
- Front and rear compatible – fork and seat stay mount only
- Includes SwissStop Flash Pro Yellow King pads
- Solid feel, power, and modulation with a snappy return
- Wider clearance for modern wheelsets
- Brake type: Mechanical
- Pad type: Cartridge
- Reach (RB): Standard
- Compat - Cable pull: Cantilever/Road
- Hardware: Stainless Steel

- Pair of D-Type disc brake pads without fins, for 1 caliper
- Available with Resin or Metallic brake compound
- Fits most 4-piston Shimano brakes, including XTR BR-M9120, XT BR-M8120, XT-BR-M8020, SLX BR-M7120, Saint BR-M820 and BR-M810, Zee BR-M640 and non-series BR-MT520 and BR-MT420 calipers
- Can be used as a lower cost alternative to H-Type or N-Type pads
- Includes spring and pin

$6.99
Shimano Replacement pads for Mountain brake shoes
- Color: Black
- Intended Brake Type: Linear Pull
- Pad Attachment Style: Threaded Post
- Pad Type: Replacement Insert - Cartridge
- Rim Compatibility: Standard
- Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600
- M70R2: Severe condition brake pad, high performance in dry or wet conditions
Page 1 of 2
Next page