Filter By:
- Bar Ends (5)
- Bottom Brackets (75)
- Brakes/Levers/Pads (135)
- Cables (45)
- Cassettes/Freewheels (45)
- Chainrings (77)
- Chains (42)
- Cranksets (64)
- Show More Categories
- Derailleurs (61)
- Forks (7)
- Handlebar Grips/Tape (105)
- Handlebars (29)
- Headsets (29)
- Pedals (84)
- Recumbent (29)
- Saddles (78)
- Seatposts (21)
- Shift/Brake Combinations (15)
- Shifters (48)
- Shocks (6)
- Stems (21)
- Other (280)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$24.95 - $29.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
- Optimized for using a Shimano XT 8000 or XTR 9000 Rear Derailleur with a 10-42, 10-44, 11-45, 11-46 rear cassette setup
- Compatible with M8000 (XT) and M9000 (XTR) series eleven-speed Shimano rear derailleurs
- Double chainrings are not currently supported
- Triple chainrings are not supported
- Direct Mount-native frames and SRAM derailleurs are not supported

$21.95
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$11.50
Tub of 25 Grade 25, 1/4" loose ball bearings to fit many brands of hubs, headsets, and bottom brackets.
Grade 25:
- Dura Ace or Campy Record quality
- 25 per tub

$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
- Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

$33.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$26.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$24.99
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks.
• Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks
• Crank bolts are included

$6.99
Make sure your kid has a good grip out on the trail with Trek's Kids' MTB Grips. Their knurled design is easy to hold onto when things get bumpy. Choose the 75/125mm pair for twist-shifter compatibility.

$7.99
Grips are a key point of contact between you and your bike. Comfortable grips are a must-have.
Product details
- Designed for use on kids' bikes with twist shifters
- Set of two grips
Specifications
- Diameter: 22.2mm
- End Type: Closed
- Lock-on: No
- Material: Kraton Rubber

$29.99
- Top mount levers for use with caliper or cantilever brakes
- Forged aluminum
- Hinge clamp style
- Return spring and reach adjustment
- Black
- 90g / pair

$24.99
Sintered Metallic replacement pads for the DH-R EVO, G-Spec DH-R, Quadiem, Quadiem, Slate T4, Slate G-Spec and "Select 4-Piston Tektro Brakes"
TRP Metallic pads are made up of hardened metallic ingredients, which are bound together with pressure and heat.
Metallic pads fade at a higher temperature than their resin or semi-metallic counterparts and offer better performance in wet and muddy conditions.
- Sintered Full Metallic compound
- Fits all TRP four piston calipers and Tektro four piston calipers
- Color: Gold
- Sold per wheel

$45.99
• Mountain-bike shifters built into linear pull-compatible brake levers
• Aluminum
• Left: triple chainring; Right: 7-speed
• Cables and housing included

$39.89
Sunlite's Adjustable Quill Stem puts your bars right where you want them. This wonderfully easy-to-use stem adjusts from 0 to +50 degrees—more than enough to help you find your ideal position. And, the 2-bolt clamp holds securely holds your bars.

$42.99
Sunlite's Adjustable Stem adjusts from 0 to +60 degrees so that you can place your handlebars wherever they are most comfortable. It boasts light and durable aluminum construction with steel bolts. It fits on 1- and 1 1/8-inch forks and accepts 25.4mm- and 31.8mm-diameter handlebars too, with included shims. Plus, its 2-bolt clamp makes changing bars easy and holds fast.

$15.99
If you have issues with numbness and fatigue when using regular grips, check out Sunlite's Bio Form Locking Grips. They feature an oversize, supportive palm area with an anatomic design for the ultimate in comfort. The dual-compound design features soft, non-slip rubber on the main grip for padding, while the harder inner core and aluminum locking rings give you a super-secure hold on your bars.

$23.99
When you need to move your handlebars up, install Sunlite's Chromoly Quill Stem Extender. One end goes inside the steerer tube and your quill stem inserts into the top. It provides 8 1/4 inches of rise and is compatible only with quill stems and steerer tubes.

$4.99 - $27.69
- 6061 Forged Alloy
- Made to O.E.M. specifications
- Correct hardness to reduce damage to frame upon impact
Page 1 of 43
Next page